Back to Heat Treat Products

ALUMINUM SALT BATH BRAZING

PRODUCT IDENTITY MELTING POINT WORKING RANGE
Alu-Braze® 960 960°F
(516°C)
1000-1200°F
(538-649°C)
Alu-Braze® 930 930°F
(499°C)
1000-1200°F
(538-649°C)
Alu-Braze® 860 860°F
(460°C)
900-1200°F
(482-649°C)

ALU-BRAZE® 960 This is the standard salt designed for low melting point, good fluidity and good braze characteristics.

ALU-BRAZE® 930 An improved salt having similar composition, but improved braze characteristics compared to Alu-Braze 960. The lower melting point offers good fluidity over a wider temperature range and is ideally suited for brazing more complex shapes and configurations. This broader range fluidity enhances both brazing and drainage which can be critical for certain parts.

ALU-BRAZE® 860 This represents our premium aluminum dip braze salt. By proper chemical balance the lowest practical melt point has been developed with no sacrifices in fluidity or braze characteristics. By virtue of the significantly lower melting point, superior drainage, lower dragout and easier cleaning the most complex shapes are best brazed in this salt. By virtue of the permissibly lower operating temperature this salt is an ideal braze medium bath for magnesium and magnesium alloys.

MISCELLANEOUS

ALU-BRAZE® ADDITIVE AF Additive for aluminum brazing salts, which maintains neutrality and proper fluxing action.

ALU-BRAZE® ADDITIVE LC Additive for aluminum brazing salts, which is used to replace volatilized lithium chloride, to improve fluidity and control melting point.

For additional infomation on Heatbath/Park Metallurgical Aluminum Brazing Salts Contact Us.

www.heatbath.com