Heatbath » Black Oxide Finishing

FOR POWDERED METAL AND ASSEMBLIES

Product Name Powder / Liquid For Use On Description
Rinse Kleen 1020 Powder Assemblies A buffered, mildly acidic material used for neutralization of residual black oxide salts. This rinse additive does not contain chromic acid. Improved wetting characteristics allow for penetration into crevices and blind holes of the black oxided parts. Effective at very low concentrations, just 1-3 oz./gallon.
No Bleed II Liquid Assemblies and Powdered Metal Used to displace entrapped or absorbed blackening salts from deep crevices, joints of steel assemblies and from powdered metal components after blackening. Carbonate bloom or bleed out can be eliminated. This hot oil is most effective when operated at or above 250°F.

For more technical information on Heatbath’s Black Oxide products for Powdered Metal and Assemblies Contact Us.

www.heatbath.com