Heatbath » Phosphate Coatings

CALCIUM MODIFIED ZINC PHOSPHATE COATINGS

Calcium Modified Zinc Phosphate coatings are typically used as a base for paint, rubber bonding, corrosion protection or break-in lubrication. The built-in grain refiner helps to form a smooth, uniform, microcrystalline structure. Calcium modified zinc phosphate coating weights can range from 150-1100 mg/ft2 depending on the formula chosen and the method of application.

Product Name Description
Phos Dip® R-2-LT Typically used as a base for paint or rubber bonding, corrosion protection or break-in lubrication. This microcrystalline calcium modified zinc phosphate coating has a built in grain refiner and achieves coating weights in the range of 300-500 mg/ft2. Used by immersion, this product meets Federal Specification TT-C-490 for Type I coatings.
Phos Dip® R-2 Spray process also meeting Federal Specification TT-C-490 for Type I coatings. Calcium modified zinc phosphate coating weights range from 150-500 mg/ft2.
Phos Dip® R-700 Calcium modified microcrystalline zinc phosphate obtains coating weights slightly heavier than Phos Dip R-2-LT. This one-component product offers ease of operation and stable bath chemistry.
Ultraphos 1300 Used for both spray and immersion processing, this calcium modified zinc phosphate achieves coatings ranging from 150-600 mg/ft2. An excellent base for solid film lubricants. Enhances paint adhesion and can be used for break-in, anti-wear applications.

For information on water based post-treatments, explore Heatbath’s Pre-Paint Sealers.

For more technical information on Heatbath’s Calcium Modified Zinc Phosphate Coatings Contact Us.

www.heatbath.com